Quick Answer: Is It Worth Sharpening A Chainsaw Chain?

How much does it cost to sharpen a chainsaw chain?

If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters..

When should you throw away a chainsaw chain?

The signs that it’s time for chainsaw chain replacement #1 – Difficulty with positioning. #2 – The chainsaw no longer pulls itself into the wood. #3 – Smoking, even when lubrication is good and chain tension is correct. #4 – Crooked cuts.

How often should you sharpen a chainsaw chain?

Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.

Why do chainsaw chain dull so quickly?

You may be putting to steep of an angle on the cutters, which will dull quickly. You’re rakers may be too far down, which will contribute to a quick dulling chain. You may be cutting dirty wood. You may be slightly touching the ground with the tip of the bar.

Can you sharpen a chainsaw with a flat file?

You can file freehand, straight across, with a flat file, or purchase a depth gauge guide that fits between the cutters and features an opening that lets you file the top of the depth gauges. The top of the depth gauges should be just a hair—0.025-inches—below the top of the cutter’s cutting corner.

Is it worth it to sharpen a chainsaw chain?

The correct file to sharpen any given chain is worth less than five bucks. It will touch up a chain and keep it sharper than new literally a hundred times (assuming there is no physical damage to the chain). … You can sharpen a chain until the little slash mark at the back of the tooth. It is, however, a learned skill.

How long should a chainsaw chain last?

A chainsaw chain can last for 5+ years with frequent use. For occasional users, a chain could last for decades.

What’s the best chainsaw sharpener?

The Best Electric Chainsaw Sharpeners for the WorkshopBEST OVERALL: Oregon 120V Bench/Wall Mounted Saw Chain Grinder.MOST VERSATILE: Oregon 120V Bench Mounted Saw Chain Grinder.ALSO CONSIDER: Oregon Professional 120V Bench Grinder.

Why does my chainsaw cut in a curve?

Uneven top plates can cause a chain to cut crooked. It’s important to keep all top plates equal length. Dull cutters damaged by rocks can cause a chain to cut crooked. … If you sharpen your chain at a 25º setting on your left hand, your right hand cutters should match.

Will dirt dull a chainsaw?

Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.

How do you tell when a chainsaw chain is worn out?

The signs that it’s time for chainsaw chain replacement#1 – Difficulty with positioning. … #2 – The chainsaw no longer pulls itself into the wood. … #3 – Smoking, even when lubrication is good and chain tension is correct. … #4 – Crooked cuts. … #5 – Missing or damaged teeth. … In Conclusion.

Does cutting wet wood dull a chainsaw?

Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water. … Using your chainsaw to cut through wet wood will not change the efficiency of your chainsaw.

How tight should a chainsaw chain be?

The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it. The chain should snap directly into position.

What is the most aggressive chainsaw chain?

brand StihlThe brand Stihl is the most aggressive chainsaw chain brand. Aggressive chains feature long-lasting, high cutting speed, and better blades. The Husqvarna is also a well-known brand for its 18-inch H30-72, 20-inch H80-72, and H4 684 0.050-inch aggressive chainsaw chains.

What is the difference between .325 and 3/8 chain?

There are two types of chains and they do two different types of jobs. The . 325 and three-eighths pitch pertains to the spacing between the rivets. … The three-eighths chain is a beefier saw and better suited to one that has more horsepower.