Quick Answer: Can You Use 2 Stroke Oil As Chainsaw Oil?

Can you use regular oil for bar and chain oil?

It is tempting to use what you probably already have on hand rather than buy bar and chain oil for your chainsaw.

This leads some to use regular motor oil for the task.

The reason is that bar and chain oil has a “high-tack” additive that prevents it from slinging off the chain as it travels around the tip..

What kind of oil do you use for a 2 stroke?

Castrol® 2T provides superior protection for 2-stroke engines. It is a mineral-based motorcycle oil designed for use in 2-stroke motorcycles, scooters, ATVs and lawn equipment. Castrol 2T is the go-to motor oil for 2-cycle engines.

What happens if you mix too much oil in a 2 stroke?

Excess oil can produce a smoky exhaust, oil leaking out of the muffler, and sometimes loss of power. While not ideal, these issues can be fixed by simply replacing the fuel in the tank with properly mixed fuel. But running a two-cycle engine with too little oil can actually destroy the unit.

How much oil do I put in a 2 stroke chainsaw?

Use a 32:1 gasoline to oil ratio. One gallon of gasoline combined with 4 oz of two-cycle engine oil.

What is a good substitute for bar and chain oil?

Tips for replacing chain oil with vegetable oil:Use canola oil – Canola oil is currently the most common environmentally compatible chain-and-bar lubricant. … Vegetable oil is thinner – Vegetable oils have lower viscosities than the bar/chain lubricants and therefore flow more readily.More items…•

What is the difference between bar and chain oil and motor oil?

Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.