How Long Does Thompson Water Seal Last On Wood?

Is Thompson Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color.

Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements.

I used my spray gun to apply, and a little goes a long way.

Obviously, you can use a brush to apply it as well..

How many coats of Thompson Water Seal do I need?

2 coatsshake the can vigorously before use. Thompson’s Water seal has a slightly milky appearence in the can,but clears quickly upon application. For best results ensure the surface is as dry as possible. Apply 2 coats using brush,roller or sprayer.

Is it better to stain or seal a deck?

Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added. The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

Does Thompson Water Seal go bad?

Opened cans of glazing compound will last for 1 year, unopened cans for 2 years, if kept above freezing. … PVC primer and Thompson’s Water Seal™, sealed tightly, can be kept indefinitely (no minimum temperature), as can concrete bonding additive if stored above freezing.

How do you remove Thompson Water Seal from wood?

You could use either a wood deck cleaner or a deck stain stripper. Cleaner if the Thompson’s was applied 2 years ago or more, stain stripper if less then 2 years. Both will need to be neutralized with a deck brightener.

What is the best waterproof sealer for wood?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

What is the best sealant for pressure treated wood?

7 Best Deck Sealers for Pressure Treated Wood- Reviews & Buyer’s GuideReady Seal 515 5-Gallon Pail Pecan Exterior Wood Stain and Sealer.Thompson’s Water Seal 041851-16 Transparent Stain, Cedar. … 3#1 Deck Premium Semi-Transparent Deck Stain.Ready Seal 505 5-Gallon Pail Light Oak Exterior Wood Stain and Sealer.More items…

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

Does Thompson Water Seal peel?

– As far as we can tell, Thompson’s® WaterSeal® does not prevent UV graying at all. This is a huge disappointment as preventing UV graying is the number one reason to stain your exterior wood and decking. – Thompson’s® WaterSeal® penetrates deep into the wood. There was no peeling or wearing.

How long does it take Thompson’s Water Seal to dry on wood?

Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson’s® WaterSeal® Waterproofing Wood Protector – Clear.

How long does Thompson’s Water Seal last on a fence?

Transparent stain is guaranteed for three years, semi-transparent stain is guaranteed for four years, and the solid stain is guaranteed for five years.

How often does Thompson’s Water Seal need to be applied?

every one to three yearsApplying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure. All Thompson’s WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck.

Can you apply Thompson’s Water Seal to wet wood?

Thompson’s® WaterSeal® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.

How many coats does Thompson’s Water Seal have?

Thompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.

What is the best finish for pressure treated wood?

For fully exposed decks, a water-repellent sealer or a penetrating semi-transparent stain may provide the best finishing solution, even on wood that has been pressure treated with preservatives.

Can I mix stain and Thompson’s Water sealer?

As long as it’s all oil based you should be able too. But if it’s a solid color stain it might turn a little transparent if mixed with the sealer…..just give it a try on a scrap piece. Bingo. As long as they use the same solvents, it should be fine.