- Can you use oil based paint over water based primer?
- Can you paint emulsion over Zinsser BIN?
- Should you primer over old paint?
- Should I use oil or water based primer?
- Is TSP a Deglosser?
- How long can you leave primer unpainted?
- Can you paint on top of shellac?
- Can I put oil based paint over latex primer?
- Can you paint water based paint over shellac?
- Why can’t you use TSP with Zinsser primer?
- Where do you buy trisodium phosphate?
- What’s the difference between Zinsser BIN and Zinsser 123?
- Can I put shellac over latex paint?
- Can you use water based paint over shellac primer?
- How long after oil based primer Can you paint?
- Is TSP safe on wood?
- How long does it take for Zinsser oil based primer to dry?
- Can I use water based paint over Kilz oil based primer?
Can you use oil based paint over water based primer?
Always prime when using water-based over oil-based paint.
Apply one to two coats of an oil-or water-based bonding primer and dry according to product directions.
However, water-based primers are fine for areas that get less use or contact, such as crown moldings.
Can you paint emulsion over Zinsser BIN?
Yes you can paint over that – just make sure it is properly dry. Also if you are doing two coats over it make sure you also leave a good amount of drying time between. BE123 seems to slow the drying process a little and you will find the paint dragging if you try and second coat to soon.
Should you primer over old paint?
You can use a primer to thoroughly cover the old color, then apply 1 or 2 coats of the new paint. Paint & primer in one paints are a newer option, which could be ideal for your situation and even shorten the project.
Should I use oil or water based primer?
Water based primer is usually used for walls and ceilings where there is new work and preparation is required, and oil based primer is primarily used for doors, windows, metal or woodwork. Enamel is hardier so surfaces that require heavy traffic or exposure to the elements are usually painted in enamel.
Is TSP a Deglosser?
TSP is in essence a strong detergent and should not be used as a deglosser. However, it is a good product for cleaning and preparing a surface for painting. Just like for any other painting job around the house it is important to work on a clean surface. … Use a clean cloth to wipe off the residue.
How long can you leave primer unpainted?
30 daysThen, how long can you leave exterior primer unpainted? 30 days is what most manufacturers recommend before needing to be re primed. It will be fine, but depending on top coat, you may need to sand it, cos exterior primers dry fairly shiny, and once cured, adhesion relies solely on keying as opposed to bonding as well.
Can you paint on top of shellac?
The trick to successfully painting over the shellac is in the preparation of the finish and the wood itself. Be sure to strip the shellac, clean the surface, and sand as necessary. Depending on the state of the shellac, you may even need to consider applying a thin coat of primer before you paint the final coat.
Can I put oil based paint over latex primer?
Painting with an oil based paint over latex is OK but doing the reverse will cause you grief for many years to come since any further coats of paints applied will stick to the latex only. … Sanding the walls will improve adhesion which is the only sticking point to consider when applying latex over oil.
Can you paint water based paint over shellac?
Yes you can as long as the shellac is dewaxed. Waterborne finishes do not adhere well to shellac that contains its natural wax.
Why can’t you use TSP with Zinsser primer?
In doing an house where there had been heavy, heavy smoking (the nicotine was running off the walls) I emailed the Zinsser site asking why they do not recommend washing the walls with TSP first. Their reply was that the TSP could leave a residue that made the primer less effective.
Where do you buy trisodium phosphate?
savogran 10622 trisodium phosphate (tsp) 4.5lbs – Walmart.com – Walmart.com.
What’s the difference between Zinsser BIN and Zinsser 123?
The 123, or Bullseye product is waterbased, can be used as a sealer primer, adhesive primer, priming friable surfaces and stain blocking. The BIN is meths based and is used as a primer and stain blocker too, the choice of which depends on what you need it for, can you give more information?
Can I put shellac over latex paint?
To apply over or under latex paint I’m pretty sure you have to make sure the shellac you’re using is not just shellac, but “de-waxed” shellac. I bought a can of Zinsser Shellac from Home Depot and after getting home read the label which said not a suitable for undercoating waterborne poly.
Can you use water based paint over shellac primer?
Any oil or latex paint can be applied over it. Professionals love B-I-N because it dries faster than any other primer. It cures as fast as it dries, making it ideal for kitchen cabinet repainting, doors, and trim work.
How long after oil based primer Can you paint?
Oil-based primers take at least eight hours to dry. You may have to lightly sand the primer over smooth wood surfaces with 180-grit sandpaper to provide an easier bonding surface. Be sure to wash away any dust caused by the sanding and allow the area to dry before adding your paint.
Is TSP safe on wood?
Suitability for exterior surfaces: TSP works well—and without damage—on a variety of surfaces, including brick and stone, cement, wood, and roofing. If the surface is previously painted, you should expect to repaint after cleaning with TSP (see next).
How long does it take for Zinsser oil based primer to dry?
30 minutesBecause it dries to the touch in 30 minutes, is ready to recoat in 2 hours and sticks to glossy surfaces without sanding, COVER-STAIN saves time on the job.
Can I use water based paint over Kilz oil based primer?
Kilz comes in latex and oil based primer. You can put any type paint over oil based primer.